Hey there! I’m a supplier of hydraulic rising bollards, and today I’m gonna talk about the minimum installation space required for these bad boys. Hydraulic Rising Bollard
First off, let’s get a bit of background. Hydraulic rising bollards are super useful for controlling access to areas. They can be found in places like parking lots, government buildings, and high – security zones. They’re designed to stop unauthorized vehicles from entering restricted areas, and they do it pretty effectively.
So, what exactly is the minimum installation space needed? Well, it depends on a few factors.
Bollard Dimensions
The size of the bollard itself is a major factor. Most standard hydraulic rising bollards have a diameter ranging from 100mm to 220mm. The height when fully raised can be anywhere from 600mm to 1200mm.
Let’s say you’ve got a bollard with a diameter of 150mm. You can’t just dig a hole that’s exactly 150mm wide. You need some extra space for installation and maintenance. A good rule of thumb is to add at least 50mm to the diameter of the bollard on each side. So, for a 150mm diameter bollard, you’d need a hole that’s about 250mm in diameter. This extra space allows for easy installation of the bollard and also gives room for any adjustments or repairs that might be needed later on.
Depth Requirements
The depth of the installation is also crucial. The bollard needs to be firmly anchored in the ground to withstand the impact of vehicles. Generally, the bollard should be installed at a depth of at least 1000mm to 1200mm. This depth provides stability and ensures that the bollard can resist the force of a vehicle hitting it.
For example, if you have a bollard that’s 800mm tall when raised, you still need to bury it deep enough so that it doesn’t topple over when a car tries to ram through. A deeper installation also helps in distributing the load evenly across the ground, reducing the risk of damage to the bollard or the surrounding area.
Spacing Between Bollards
When you’re installing multiple bollards, the spacing between them is important. If the bollards are too close together, it might be difficult to install them properly. On the other hand, if they’re too far apart, a vehicle could potentially squeeze through.
A common spacing between bollards is around 1200mm to 1500mm. This spacing allows for easy installation and also provides an effective barrier against vehicles. However, in some high – security areas, the spacing might be reduced to as little as 800mm to prevent even small vehicles from getting through.
Surrounding Infrastructure
The surrounding infrastructure also plays a role in determining the minimum installation space. If there are other utilities like water pipes, electrical cables, or drainage systems nearby, you need to make sure that the installation of the bollards doesn’t damage them.
For instance, if there’s an electrical cable running underground near the installation site, you need to keep a safe distance from it. A safe distance could be around 300mm to 500mm, depending on the type of cable and local regulations.
Site Conditions
The condition of the installation site is another factor. If the ground is soft or unstable, you might need to take extra measures to ensure the bollards are properly installed. This could involve using a concrete foundation or additional support structures.
In a soft soil area, you might need to dig a larger and deeper hole and fill it with concrete to provide a stable base for the bollard. This means you’ll need even more space for the installation.
Installation Process
During the installation process, you also need to consider the space required for the equipment and workers. You’ll need enough room for the excavator to dig the holes, and for the workers to maneuver around the bollards.
A good estimate is to have an additional 1 – 2 meters of clear space around the installation area. This gives the workers enough room to operate the equipment safely and to install the bollards without any hindrance.
Summary
To sum it up, the minimum installation space for a hydraulic rising bollard depends on the bollard’s dimensions, depth requirements, spacing between bollards, surrounding infrastructure, site conditions, and the installation process.
As a general guideline, for a single bollard with a 150mm diameter, you’d need a hole about 250mm in diameter and at least 1000 – 1200mm deep. If you’re installing multiple bollards, you should space them 1200 – 1500mm apart, with an additional 1 – 2 meters of clear space around the installation area.
If you’re thinking about installing hydraulic rising bollards for your property, it’s important to consider all these factors to ensure a successful installation. And if you have any questions or need more information, don’t hesitate to reach out to me. I’d be more than happy to help you with your bollard needs. Whether you’re looking for high – security bollards for a government building or just want to control access to your parking lot, I’ve got the right products for you.
Contact me if you’re interested in purchasing hydraulic rising bollards. We can have a chat about your specific requirements and figure out the best solution for your situation.
ANPR Barrier Control System References
- Industry standards for hydraulic rising bollard installation
- Manufacturer’s guidelines for bollard installation and maintenance
Shenzhen Anxia Heavy Industries Co., Ltd
As one of the leading hydraulic rising bollard manufacturers and suppliers in China, we warmly welcome you to buy cheap hydraulic rising bollard made in China here from our factory. All our products are with high quality and low price.
Address: Room 1206,Building 7,Hengdashishanghuigu Building (East Section), Fulong Road, Shanghenglang Community, Dalang Sub-district,Longhua District, Shenzhen City
E-mail: sales05@anxiagroup.com
WebSite: https://www.anxiagroup.com/
