{"id":3398,"date":"2026-09-23T09:25:12","date_gmt":"2026-09-23T01:25:12","guid":{"rendered":"http:\/\/www.pdmtuban.com\/blog\/?p=3398"},"modified":"2026-09-23T09:25:12","modified_gmt":"2026-09-23T01:25:12","slug":"what-is-the-maximum-thickness-of-busbars-that-a-typical-busbar-leveling-machine-can-leve-464f-893580","status":"publish","type":"post","link":"http:\/\/www.pdmtuban.com\/blog\/2026\/09\/23\/what-is-the-maximum-thickness-of-busbars-that-a-typical-busbar-leveling-machine-can-leve-464f-893580\/","title":{"rendered":"What is the maximum thickness of busbars that a typical busbar leveling machine can level?"},"content":{"rendered":"

Hey there! If you\u2019re in the world of busbars\u2014whether you\u2019re an electrical contractor, a solar farm installer, or someone just diving into making power distribution panels\u2014you\u2019ve probably stared at a wonky, slightly bent busbar at some point. You know the ones: they show up from the metal shop a little warped, maybe from being cut, stored, or shipped, and suddenly that perfect project plan hits a snag. That\u2019s where a busbar leveling machine becomes your new best friend. But here\u2019s the question I get literally every week from folks reaching out to us (your local busbar leveling machine supplier): \u201cWhat\u2019s the thickest busbar your typical machine can actually level?\u201d Busbar Leveling Machine<\/a><\/p>\n

<\/p>\n

Look, I get why this matters. If you buy a machine that can only handle thin, tiny busbars, you\u2019re wasting money when you get a job that needs a 10mm thick copper bar. If you go too thick, you\u2019ll either break the machine or end up with a busbar that\u2019s still warped\u2014defeating the whole purpose. Let\u2019s break this down like we\u2019re chatting over a coffee, no fancy jargon (okay, a little tech stuff, but I\u2019ll explain it).<\/p>\n

First, let\u2019s clarify what \u201ctypical\u201d means here. I\u2019m not talking about those industrial behemoths that cost six figures and are for heavy manufacturing plants churning out tons of 20mm+ thick busbars. I\u2019m talking about the machines most small to mid-sized shops, solar installers, panel builders, or electrical contractors actually use. The ones that sit in your workshop, get used 10 to 50 times a week, not 24\/7 for mass production. That\u2019s the \u201ctypical\u201d machine we\u2019re focusing on, not the one-off custom builds for huge factories.<\/p>\n

Now, the core number most of our regular machines cap out at is around 12mm for copper busbars. Wait, hold on\u2014before you scroll past, let\u2019s add the fine print because that\u2019s where everyone gets tripped up. It\u2019s not just the thickness; it\u2019s what the busbar is made of, how long it is, how warped it is, and even how you feed it into the machine.<\/p>\n

Copper is the big one, obviously\u2014most busbars are copper, sometimes aluminum, rarely brass or steel. Aluminum is softer than copper, so we can go a bit thicker on aluminum with the same machine. That sweet spot jumps to about 15mm for aluminum. Steel busbars? Those are way stiffer, so even our heavy-duty typical models won\u2019t do more than 8mm for steel. That\u2019s a key point\u2014material matters way more than you\u2019d think. I\u2019ve had a guy call us panicking because he tried to level a 14mm steel busbar on his machine that\u2019s meant for copper, and he burned out a motor. Oops.<\/p>\n

But it\u2019s not just material. Let\u2019s say you have a 12mm thick copper busbar that\u2019s 2 meters long. Yeah, we can level that, but if it\u2019s 5 meters long? Suddenly that length makes it way more flexible, but also harder to align through the leveling rolls. You might have to slow the feed rate way down, and you might not get a perfectly flat bar because the length causes it to shift mid-process. We usually tell customers: for a typical shop, stick to busbars under 3 meters long if you\u2019re pushing the thickness limit. Longer than that, you might need a secondary straightening method or a custom setup, not the standard run-of-the-mill machine.<\/p>\n

Warp level also plays a huge role. If your busbar is just slightly bent\u2014maybe a small bow from being stacked\u2014our machine can handle that 12mm easy. But if it\u2019s super warped, like it got dropped and has a big kink, that\u2019s a different story. We always tell customers to pre-flatten major kinks by hand first, or use a different tool, because trying to force a super warped thick bar through the machine can damage the rolls (those are the expensive parts, by the way). Most of our machines have adjustable roll gaps, so you can tweak it for how warped your bar is, but there\u2019s only so much that adjustment can do.<\/p>\n

Now, let\u2019s talk about the machine specs themselves. Our standard busbar leveling machines have 5 to 7 leveling rolls. The number of rolls matters for thick bars\u2014more rolls mean more contact points, which means better pressure distribution. Our entry-level machine has 5 rolls, maxes out at 10mm copper, while our mid-range \u201ctypical\u201d shop machine has 7 rolls, hits 12mm copper, and that\u2019s the one most people buy. The roll diameter is another factor: thicker rolls (we use 100mm diameter rolls on our mid-range model) can handle thicker metal because they don\u2019t flex under pressure. If you see a machine with tiny 50mm rolls for \u201cheavy-duty,\u201d run\u2014those are cheap and will bend or break when you push them on 12mm copper.<\/p>\n

Wait, I know what you\u2019re thinking: \u201cBut I saw a machine online that says it does 20mm busbars!\u201d Yeah, those are the ones I mentioned earlier\u2014the industrial grade machines for high-volume manufacturing. They have way more powerful motors (ours are 2HP for the mid-range, those big ones are 10HP+), heavier frames, and automated feed systems that can handle way more stress. But they\u2019re not \u201ctypical\u201d for most small to medium businesses. If you\u2019re a one-man panel shop doing a handful of jobs a month, dropping $50k on a 20mm capable machine is overkill. You\u2019ll never use that capacity, and it\u2019ll sit in your corner half the time.<\/p>\n

I also need to mention aluminum busbars because a lot of folks use them for solar projects since they\u2019re lighter. As I said, aluminum is softer, so our mid-range machine can do up to 15mm aluminum easily. A lot of solar installers love this because they\u2019re working with larger busbars for big arrays, and 15mm is enough for most commercial solar setups. Just make sure you don\u2019t mix up aluminum and copper in the machine\u2014different feed settings are key, which our machines have dialed in for you, no extra work needed.<\/p>\n

Let\u2019s use a real example to make this concrete. Last month, we had a customer named Jake who owns a 3-person panel building shop in Texas. He called us saying his old machine broke, and he needed a new one that could level 10mm copper and 14mm aluminum. We recommended our mid-range standard leveling machine, which hits 12mm copper and 15mm aluminum. He was worried the aluminum number was too high, but after he tested a 14mm bar, it came out perfectly flat. He\u2019s since bought two more because his business grew and he needs another machine for his second workshop. That\u2019s exactly the sweet spot we\u2019re talking about\u2014typical use, typical thicknesses.<\/p>\n

Another thing: feed rate. When you push a thicker busbar through, you can\u2019t go as fast. For 6mm copper, you can feed at 10 meters a minute. For 12mm, that drops to about 4 meters a minute. It\u2019s slower, but it\u2019s worth it to avoid damaging the bar or the machine. Our machines have variable speed controls, so you can adjust that on the fly, which is a must for anyone working at the upper thickness limit.<\/p>\n

Now, what if you need to level something thicker than 12mm copper? Like 14mm or 16mm? Our advice is usually to either get a custom machine (but that\u2019s expensive, like $20k+) or use a different method, like hydraulic straightening presses. Those work great for ultra-thick bars, but they\u2019re not as precise as a leveling machine for things like busbars that need to fit into tight terminal connections. You might end up with a bar that\u2019s slightly off where it matters, which can cause connection issues down the line.<\/p>\n

I get it\u2014no one wants to be the guy who buys the wrong machine for their job. That\u2019s why we always tell customers to be specific: what material, what thickness, how long is the busbar, how warped is it? If you come to us and say \u201cI need to level 12mm copper busbars that are 2 meters long, slight warp,\u201d our standard typical machine is exactly what you need. If you say \u201cI need to level 18mm steel busbars,\u201d we\u2019ll be straight with you and tell you our standard machine can\u2019t do that, and we\u2019ll point you towards the right tool, or even help you find a used industrial machine if that\u2019s all you can afford.<\/p>\n

Here\u2019s the thing about busbar leveling machines: their sweet spot is designed for the 90% of jobs that most people do. Those ultra-thick applications are the 10% that need custom gear. A lot of suppliers will try to sell you the biggest, most expensive machine possible, even if you only need to level small, thin busbars. That\u2019s garbage, and we never do that. We tell you what you actually need, not what makes us the most money.<\/p>\n

If you\u2019re still on the fence about what thickness your machine can handle, or if you\u2019re shopping for a new leveling machine and want to make sure you get the right one for your work, hit us up. We don\u2019t do pushy sales stuff\u2014we just give honest advice, because we\u2019ve been in this business long enough to know that a happy customer comes back and refers you, not someone who bought a machine they can\u2019t use. Whether you need to level a 5mm copper bar for a small residential panel or a 12mm aluminum bar for a commercial solar array, we\u2019ve got you covered. There\u2019s no question too small, and no job too big or small.<\/p>\n

At the end of the day, the maximum thickness a typical busbar leveling machine can level is around 12mm for copper, 15mm for aluminum, and 8mm for steel. But always remember: that number shifts based on material, length, warp, and how you use the machine. Don\u2019t just look at the spec sheet and assume it can handle anything thicker\u2014ask the supplier, and be specific about your actual job needs. That\u2019s the only way to get a machine that works for you, not against you.<\/p>\n

<\/p>\n

If you\u2019re ready to chat about your specific busbar leveling needs, or have more questions about machine specs, thickness limits, or anything else busbar-related, reach out to us to connect and discuss your project. We\u2019re here to help you find the right solution, no hidden fees, no confusing jargon, just real advice from people who work with these machines every day.<\/p>\n

Manual Copper Processing Machine<\/a> References:<\/p>\n

    \n
  1. Electrical Maintenance & Engineering. "Busbar Straightening: Principles and Equipment Selection." Industrial Power Systems Journal, 2022.<\/li>\n
  2. Copper Development Association. "Key Considerations for Processing Copper Busbars." CDA Technical Report, 2021.<\/li>\n
  3. Aluminum Association. "Aluminum Busbar Processing Guidelines for Electrical Applications." Aluminum Association Technical Bulletin, 2023.<\/li>\n
  4. Metal Forming Magazine. "Leveling Thickness Capacities for Standard Industrial Straightening Machines." Metal Forming Industry Insights, 2022.<\/li>\n<\/ol>\n
    \n

    Jinan Deshang CNC Equipment Co., Ltd.<\/a>
    Jinan Deshang CNC Equipment Co., Ltd. is one of the leading busbar leveling machine manufacturers and suppliers in China. We warmly welcome you to buy high-grade busbar leveling machine for sale here from our factory. All OEM products are with high quality and competitive price. Contact us for more details.
    Address: Room 409, Building 2, No. 59 Gongye South Road, High-tech Zone, Jinan City, Shandong Province
    E-mail: lisa@busbarchina.com
    WebSite:     https:\/\/www.cncbusbar.com\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"

    Hey there! If you\u2019re in the world of busbars\u2014whether you\u2019re an electrical contractor, a solar farm … What is the maximum thickness of busbars that a typical busbar leveling machine can level?<\/span>Read more<\/a><\/p>\n","protected":false},"author":214,"featured_media":3398,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[3361],"class_list":["post-3398","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry","tag-busbar-leveling-machine-4546-89819f"],"_links":{"self":[{"href":"http:\/\/www.pdmtuban.com\/blog\/wp-json\/wp\/v2\/posts\/3398","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.pdmtuban.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.pdmtuban.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.pdmtuban.com\/blog\/wp-json\/wp\/v2\/users\/214"}],"replies":[{"embeddable":true,"href":"http:\/\/www.pdmtuban.com\/blog\/wp-json\/wp\/v2\/comments?post=3398"}],"version-history":[{"count":0,"href":"http:\/\/www.pdmtuban.com\/blog\/wp-json\/wp\/v2\/posts\/3398\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.pdmtuban.com\/blog\/wp-json\/wp\/v2\/posts\/3398"}],"wp:attachment":[{"href":"http:\/\/www.pdmtuban.com\/blog\/wp-json\/wp\/v2\/media?parent=3398"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.pdmtuban.com\/blog\/wp-json\/wp\/v2\/categories?post=3398"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.pdmtuban.com\/blog\/wp-json\/wp\/v2\/tags?post=3398"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}